Thin joint Mortar Scoop, Sand-lime brick NL 150mm
ELBO Standard thin joint mortar scoop 150mm This stainless steel mortar scoop is specifically developed for a steady application of thin joint mortar to the joints of calcium silicate blocks or elements of 150mm.
Are you going to process Chamfered blocks? Ensure that you order the chamfered toothed strip for this Mortar Scoop. Look below at the related products or go directly to this product: LVS 150 11801
The ELBO Standard thin joint mortar scoop 150mm is made of stainless steel and specifically developed for a steady application of thin joint mortar to the joints of calcium silicate blocks or elements. The steady application of the mortar to the joints of calcium silicate blocks or elements increases the quality of the wall. The mortar must be mixed according to the instructions on the thin joint mortar packaging. The distribution of mortar from the ELBO tools are adjusted to these instructions. The ergonomic form of the mortar scoop and the position of the handle provide the optimal user experience. The mortar scoop will be delivered with 2 stainless steel toothed strips, one with a tongue/groove strip and one with interlocking strip so that you can bond both calcium silicate blocks and/or elements. These strips are easy to change and because of the smooth inner walls the mortar applicator is easy to clean. Due to the feet on the bottom of the scoop you can put the scoop temporarily on the wall without wasting any mortar. With the help of the ELBO universal support you can put the scoop on the mortar applicator. This way you always have the scoop nearby. The Standard mortar scoops are available for a variety of wall thicknesses.
|235 x 154 x 56 mm
|Calduran, Makz, Xella NL
|Calduran, Makz, Silka NL