Thin joint Mortar Sledge Economy, chamfered Sand-lime brick NL 70mm

The ELBO Economy thin joint mortar applicator 70mm (including chamfered strip) is made of stainless steel and specifically developed for a steady application of thin joint mortar to the joints of calcium silicate blocks, elements or chamfered blocks. The steady application of the mortar increases the quality of the wall. The mortar must be mixed according to the instructions on the thin joint mortar packaging. The distribution of mortar from the ELBO tools are adjusted to these instructions. First, a bed joint is applied in thin joint mortar. This is done by filling the applicator, then placing it at the end of the wall, opening the slide of the applicator and consequently pulling the applicator backward at a steady pace. By closing the slide you will stop the application of the thin joint mortar. The mortar applicator will be delivered with 2 suitable toothed strips for spreading mortar. One strip for calcium silicate blocks and one for chamfered blocks. These toothed strips ensure the right mortar release and can easily be removed from the applicator. Because of the smooth inner– and outer walls the mortar applicator is easy to clean. The integrally formed glides on the underside of the sledge ensures that the sledge can slide across the wall easily. Due to easier construction and production the sledge has a Economy price. This way you have a quality sledge for a low–budget price. The Economy mortar applicators are available for a variety of wall thicknesses.